Htc Z5426 Manual de usuario

EnglishOperator's Manual Z5426 / 968999508 Z4219 / 968999511 Z4824 / 968999512 Z4220 / 968999655 Z4619 / 968999656 Z4824BF / 96

English-10SAFETYWARNING!Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects, or other re

English-11SAFETYWARNING!When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equ

English-12SAFETYBe extra cautious when driving on slopes8011-509Never allow children to operate the machine8011-517Keep children away from work area80

English-13SAFETYSafe Handling of GasolineTo avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely am

English-14SAFETYNever drive the machine in an enclosed space8011-515WARNING!The battery contains lead and lead compounds, chemicals that are considere

English-15SAFETY• Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened, torqued and that the

English-16SAFETY8011-515Clean the machine regularlyIMPORTANT INFORMATIONThe parking brake is not sufcient to lock the machine in place during transpo

CONTROLSEnglish-17This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is tted with either a Kohler or Briggs & Stratton fou

CONTROLSEnglish-188011-789 Steering controlsWARNING!The machine can turn very rapidly if one steering control is moved much further forward than the o

CONTROLSEnglish-19Seat Adjustment KnobsThe seat can be adjusted lengthways. When making adjustments, loosen the four knobs under the seat pan, after w

©2008 HTC. All rights reserved.Beatrice, NE. Printed in U.S.A.

CONTROLSEnglish-20WARNING!Gasoline is highly ammable. Observe caution and ll the tank outdoors (see the safety instruction).WARNING!The engine and t

CONTROLSEnglish-21Blade switchTo engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down

CONTROLSEnglish-22Throttle ControlThe throttle control regulates the engine speed and thereby the rate of rotation of the blades, assuming the blade s

CONTROLSEnglish-234 1/24 3 1/23 2 1/22 1 1/2Lifting Lever for the Mower DeckThe deck cutting height is achieved with the foot pedal. To lift the deck,

English-24OPERATIONRead the “Safety Instructions” section and the following pages if you are unfamiliar with the machine.TrainingZero turn mowers are

English-25OPERATION8011-484Start conditions4 1/24 3 1/23 2 1/22 1 1/28011-753Raise the mower deckStarting the Engine1. Sit on the seat. 2. Raise the

English-26OPERATION4. Disengage the mower blades by depressing the blade switch.5. Move the steering controls outward to the locked (outer) neutral

English-27OPERATION8. Press in and turn the ignition key to the start position.8011-742Turn to the start position9. When the engine starts, immediat

English-28OPERATIONWARNING!Lead-acid batteries generate explosive gases. Keep sparks, ame and smoking materials away from batteries. Always wear eye

English-29OPERATIONRunning1. Release the parking brake by moving the lever downward. Your mower is equipped with an operator presence system. When th

CONTENTSINTRODUCTION ...5Congratulations...

English-30OPERATIONWARNING!Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes.IMPORTANT INFORMATIONControl

English-31OPERATIONWARNING!Clear the lawn of stones and other objects that can be thrown out by the blades.WARNING!Never drive the rider on terrain th

English-32OPERATIONIMPORTANT INFORMATIONLeaving the ignition switch in any other position than “OFF” will cause the battery to be discharged and the h

English-33OPERATIONManual TransportWhen pushing or pulling the mower, be sure to engage the IZT (Integrated Zero Turn Transaxle) bypass linkages. The

English-34MAINTENANCEMaintenance ScheduleThe following is a list of maintenance procedures that must be performed on the machine. For those points not

English-35MAINTENANCEMaintenance Before AfterDaily Weekly At least once each yearMaintenance interval in hours25 50 100 300Check/adjust throttle and c

English-36MAINTENANCEBatteryYour mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the batt

English-37MAINTENANCEIgnition SystemThe engine is equipped with an electronic ignition system. Only the spark plug requires maintenance.For recommende

English-38MAINTENANCEEngine Cooling Air IntakeCheck that the engine’s cooling air intake is free from leaves, grass, and dirt. If the cooling air inta

English-39MAINTENANCEReplacing the Air FilterIf the engine seems weak or runs unevenly, the air lter may be clogged. If the machine is run with a dir

WARNING!Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these

English-40MAINTENANCEIMPORTANT INFORMATIONOperating the engine with loose or damaged air cleaner components could allow unltered air into the engine

English-41MAINTENANCE6. Align the tabs on the cover with the slots in the housing and replace air lter cover.8009-407Align the tabs8009-410Close the

English-42MAINTENANCEFuel FilterReplace the line-mounted fuel lter every 100 hours (once per season) or more regularly if it is clogged.To replace th

English-43MAINTENANCEV-beltsCheck every 100 hours of operation. Check for severe cracking and large nicks. NOTE: The belt will show some small cracks

English-44MAINTENANCEEZT beltTo replace EZT (E-Series Zero Turn Transaxle) beltPark the mower on a level surface. Engage the parking brake.EZT belt re

English-45MAINTENANCEChecking the BladesIn order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged.

English-46MAINTENANCEAdjusting the Mower DeckWARNING!Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handl

English-47MAINTENANCEFront-to-back adjustment To obtain the best cutting performance, the deck should be adjusted so the front tip of the blades are a

English-48MAINTENANCEGauge WheelsAnti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desire

English-49MAINTENANCECleaningRegular cleaning and washing, especially under the mower deck, will increase the machine’s life-span. Make it a habit to

English-5INTRODUCTIONCongratulationsThank you for purchasing a Husqvarna ride-on mower. This machine is built for superior efciency to rapidly mow pr

English -50LUBRICATIONLubrication ScheduleGeneralRemove the ignition key to prevent unintentional movements during lubrication.When lubricating with a

English -51LUBRICATIONLubricating With The ScheduleCaster wheelsLubricate with a grease gun. One zerk for each bearing, two strokes. Use only good qua

English -52LUBRICATIONOil Level Check the oil level in the engine when the machine is standing level and the engine is stopped. Remove the dipstick, w

English -53TROUBLESHOOTING GUIDEProblemCauseThe engine will not start. • The blade switch is engaged.• The steering controls are not locked in the n

English -54TROUBLESHOOTING GUIDEThe engine seems weak. • Clogged air lter.• Defective spark plugs.• Carburetor incorrectly adjusted.The engine ove

English-55STORAGEWinter StorageAt the end of the mowing season, the machine should be readied for storage (or if it will not be in use for longer than

English-56WIRING DIAGRAMSSOLENOIDPTOPTOSWITCHSWITCHENGINEENGINEGROUNDGROUND141581054261. Battery2. Accessory outlet3. Key switch4. To engine pigtail5.

English-57WIRING DIAGRAMS1. Battery2. Accessory outlet3. Key switch4. To engine pigtail5. Hour meter6. Seat switch7. Run relay8. Blade switch9. Brake

English-58TECHNICAL DATAEngineManufacturer Type PowerLubricationOil capacity excluding lterOil capacity including lterEngine oil (See viscosity diag

English-59TECHNICAL DATACutting WidthCutting HeightUncut CircleNumber of BladesBlade LengthNose RollersSprung SeatHinged Arm RestsHour MeterBlade Enga

English-6INTRODUCTIONGood ServiceHusqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This en

English-60TECHNICAL DATAEngineManufacturer Type PowerLubricationOil capacity excluding lterOil capacity including lterEngine oil (See viscosity diag

English-61TECHNICAL DATACutting WidthCutting HeightUncut CircleNumber of BladesBlade LengthNose RollersSprung SeatHinged Arm RestsHour MeterBlade Enga

English-62TECHNICAL DATAEngineManufacturer Type PowerLubricationOil capacity excluding lterOil capacity including lterEngine oil (See viscosity diag

English-63TECHNICAL DATACutting WidthCutting HeightUncut CircleNumber of BladesBlade LengthNose RollersSprung SeatHinged Arm RestsHour MeterBlade Enga

English-64TECHNICAL DATAAccessoriesHead lightsBioClip attachment (Mulch clip)Collection systemTorque SpecicationsEngine crankshaft bolt 50 ft/lb (67

English-65CONFORMITY CERTIFICATESUSA requirementsLabels are placed on the engine and/or in the engine compartment stating that the machine will fulll

SERVICE JOURNALEnglish-66ActionDate, mtr reading, stamp, signDelivery Service1. Charge the battery.2. Adjust the tire pressure of all wheels to 15 P

SERVICE JOURNALEnglish-67After the First 5-8 Hours1. Change engine oil.

SERVICE JOURNALEnglish-68Action Date, mtr reading, stamp, sign25-Hour Service1. Check the fuel pump’s air lter.2. Sharpen/Replace mower blades if r

SERVICE JOURNALEnglish-69Action Date, mtr reading, stamp, sign50-Hour Service1. Perform the 25-hour service.2. Clean/replace the air cleaner’s lter

English-7SYMBOLS AND DECALSThese symbols are found on the machine and in the operator’s manual.Study them carefully so that you know what they mean. U

SERVICE JOURNALEnglish-70Action Date, mtr reading, stamp, sign100-Hour Service1. Perform the 25-hour service.2. Perform the 50-hour service.3. Chan

SERVICE JOURNALEnglish-71Action Date, mtr reading, stamp, sign300-Hour Service1. Inspect the machine. Come to agreement with the customer as to w

SERVICE JOURNALEnglish-72Action Date, mtr reading, stamp, signAt Least Once Each Year1. Clean the engine’s cooling air intake (25 hours).2. Replace

SERVICE JOURNALEnglish-73ActionDate, mtr reading, stamp, sign

SERVICE JOURNALEnglish-74ActionDate, mtr reading, stamp, sign

P/N 539 130936R1 12/13/07

English-8SYMBOLS AND DECALS Read Shut off engine and Keep a safe Use on slopes No passengers Operator’s remove key before distance from no gr

English-9SAFETYSafety InstructionsThese instructions are for your safety. Read them carefully.IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING